Welbore cleanout tools list
| 9-5/8" WBCU Tools (43.5 ppf to 53.5 ppf) | |
| 9-5/8" Casing Scraper Tool | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Can be used for deburring perforation burrs | Yes |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 9-5/8" Casing Brush Tool | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 9-5/8" Downhole Filter Tool | Make and Model |
| Uses screens as filter media | Yes |
| Fluid by pass feature while running in hole | Yes |
| Debris trapping mechanism | Yes |
| Secondary circulating mechanism in case of plugged screens | Yes |
| Can be used as BOP washing tool in conjunction with a "Jetting Sub" | Yes |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 9-5/8" Drift Sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Gauge sleeve size | Specify |
| Gauge sleeve free to rotate w/ fluid bypass | Yes |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 9-5/8" BOP/Wellhead Clean Out tool | Make and Model |
| Uses screens as filter media | Yes |
| Debris trapping mechanism | Yes |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 9-5/8" Down hole magnets | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| With no external bolts/ rings etc. | Yes |
| Replaceable magnet bars | Yes |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 9-5/8" Perforation burr mill | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Expandable mill face | Yes |
| Stabilizer with fluid by pass | Yes |
| Fixed lower sleeve with mill face | Yes |
| With drift sub above and below the mill face | Yes |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 9-5/8" Pump-out sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Secondary circulating mechanism in case of plugged outlet | Yes |
| Working mechanism | Specify |
| Top connection | 4-1/2" IF Box |
| Bottom connection | 4-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" WBCU Tools (26 ppf to 32 ppf) | |
| 7" Casing Scraper Tool | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Can be used for deburring perforation burrs | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" Casing Brush Tool | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" Downhole Filter Tool | Make and Model |
| Uses screens as filter media | Yes |
| Fluid by pass feature while running in hole | Yes |
| Debris trapping mechanism | Yes |
| Secondary circulating mechanism in case of plugged screens | Yes |
| Can be used as BOP washing tool in conjunction with a "Jetting Sub" | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" Drift Sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Gauge sleeve size | Specify |
| Gauge sleeve free to rotate w/ fluid bypass | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" BOP/Wellhead Clean Out tool | Make and Model |
| Uses screens as filter media | Yes |
| Debris trapping mechanism | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" Down hole magnets | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| With no external bolts/ rings etc. | Yes |
| Replaceable magnet bars | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" Perforation burr mill | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Expandable mill face | Yes |
| Stabilizer with fluid by pass | Yes |
| Fixed lower sleeve with mill face | Yes |
| With drift sub above and below the mill face | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 7" Pump-out sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Secondary circulating mechanism in case of plugged outlet | Yes |
| Working mechanism | Specify |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 5-1/2" WBCU Tools for 5-1/2" (17 ppf to 23 ppf) | |
| 5-1/2" Casing Scraper Tool | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Can be used for deburring perforation burrs | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 5-1/2" Casing Brush Tool | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 5-1/2" Downhole Filter Tool | Make and Model |
| Uses screens as filter media | Yes |
| Fluid by pass feature while running in hole | Yes |
| Debris trapping mechanism | Yes |
| Secondary circulating mechanism in case of plugged screens | Yes |
| Can be used as BOP washing tool in conjunction with a "Jetting Sub" | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 5-1/2" Drift Sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Gauge sleeve size | Specify |
| Gauge sleeve free to rotate w/ fluid bypass | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 5-1/2" Down hole magnets | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| With no external bolts/ rings etc. | Yes |
| Replaceable magnet bars | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 5-1/2" Perforation burr mill | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Expandable mill face | Yes |
| Stabilizer with fluid by pass | Yes |
| Fixed lower sleeve with mill face | Yes |
| With drift sub above and below the mill face | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 5-1/2" Pump-out sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Secondary circulating mechanism in case of plugged outlet | Yes |
| Working mechanism | Specify |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 4-1/2" WBCU Tools (12.6 ppf to 15.1 ppf) | |
| 4-1/2" Casing Scraper Tool | Make and Model |
| One piece main mandrel | Yes |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Can be used for deburring perforation burrs | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 4-1/2" Casing Brush Tool | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Non rotating sleeves | Yes |
| 360 degree coverage | Yes |
| Can be used with cement drilling BHA | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 4-1/2" Downhole Filter Tool | Make and Model |
| Uses screens as filter media | Yes |
| Fluid by pass feature while running in hole | Yes |
| Debris trapping mechanism | Yes |
| Secondary circulating mechanism in case of plugged screens | Yes |
| Can be used as BOP washing tool in conjunction with a "Jetting Sub" | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 4-1/2" Drift Sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Gauge sleeve size | Specify |
| Gauge sleeve free to rotate w/ fluid bypass | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 4-1/2" Down hole magnets | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| With no external bolts/ rings etc. | Yes |
| Replaceable magnet bars | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 4-1/2" Perforation burr mill | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Expandable mill face | Yes |
| Stabilizer with fluid by pass | Yes |
| Fixed lower sleeve with mill face | Yes |
| With drift sub above and below the mill face | Yes |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| 4-1/2" Pump-out sub | Make and Model |
| One piece main mandrel | Yes |
| Mandrel yield strength | Specify |
| Secondary circulating mechanism in case of plugged outlet | Yes |
| Working mechanism | Specify |
| Top connection | 2-7/8" IF Box |
| Bottom connection | 2-7/8" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
| Jetting sub | Make and Model |
| Mechanism for jetting | Specify |
| Option to run with or without "BOP/ Wellhead Clean Out tool" | Yes |
| Top connection | 3-1/2" IF Box |
| Bottom connection | 3-1/2" IF Pin |
| Maximum tool OD | Specify |
| Tool ID | Specify |
| Overall tool length | Specify |
| Additional Items | Specify, if any |
